Skip the hassle of sourcing, cutting and transporting your own frame pipe with the Carl’s Pipe Framing Kit. It includes the necessary pre-sized pipes to assemble your golf simulator enclosure frame, making setup faster, easier and more convenient.
With no store runs, special tools or pipe cutting required, you can spend less time building and more time enjoying your simulator.
Every Carl's Place DIY Golf Simulator Enclosure Kit needs a frame, and the kit does not include the pipe. This is the shortcut: 1-inch EMT conduit already cut to the exact lengths your enclosure size requires and marked so each piece goes where it belongs.
The alternative is a trip to a building supply store with a cut sheet, a pipe cutter and a vehicle long enough to carry 10-foot conduit home. That is a perfectly reasonable way to save money, and Carl's Place supplies the cut lengths and quantities with every enclosure so you can do exactly that. This kit exists for everyone who would rather open a box and start assembling.
One limitation worth knowing before you choose: the DIY frame is not rated to carry mounted electronics. Projectors and overhead launch monitors need to be ground-based or ceiling-mounted on a DIY build. If you want to hang hardware off the frame itself, the Pro enclosure and its 2-inch pipe kit are the products that do that.
Select the enclosure size that matches your enclosure exactly. If you are ordering this separately from the enclosure, check your original order or the specification chart before choosing.
Shipping costs are calculated at checkout.
Available in the following options:
- 7.7 x 10 ft
- 7.7 x 13 ft
- 8 x 8 ft
- 8 x 10.5 ft
- 8.5 x 11.5 ft
- 9 x 12 ft
Features
- Pre-cut to your enclosure size - every length arrives ready to assemble, no measuring and no cutting
- Marked for position - each pipe is labelled so the frame goes together in order
- 1 in EMT electrical metallic tubing - the specified frame material for every Carl's Place DIY enclosure. True outer diameter is 1.163 in / 27 mm
- No hauling conduit - saves a hardware store trip and a vehicle long enough for 10 ft lengths
- Ships by standard carrier - no freight booking or pallet delivery
- Not rated for frame-mounted electronics - use ground or ceiling mounts for projectors and launch monitors on a DIY build
In The Box
- Pre-cut and marked 1 in EMT pipes in the lengths and quantities required for the DIY enclosure size selected
The DIY Golf Simulator Enclosure Kit, which supplies the fittings, screen and enclosure fabric, is sold separately.
Specifications
| Pipe material | 1 in EMT (electrical metallic tubing) |
| True outer diameter | 1.163 in / 27 mm - 1 in is the US trade name, not the measured diameter |
| Supplied | Pre-cut to length and marked for position |
| Compatible with | Carl's Place DIY Golf Simulator Enclosure Kit only - sold separately |
| Sizes | 7.7 x 10, 7.7 x 13, 8 x 8, 8 x 10.5, 8.5 x 11.5 and 9 x 12 ft |
| Frame-mounted electronics | Not supported on the DIY frame |
| Shipping | Standard carrier, no freight or lift gate required |
| Warranty | None - Carl's Place does not warrant its enclosure components |
| Origin | Carl's Place, Milton, Wisconsin, USA |
Manuals
Installation guide and setup documentation coming soon. For support, email support@simulatorshq.com
Choose options